Drywall Screws: What They’re Best For
Posted By Connie on March 29, 2011
Drywall, also known as plasterboard or gypsum board, is a panel made from plaster, hard pressed in between two thick sheets of paper. It is widely used to make interior walls and ceilings. Drywall sheets can be made from fibreglass rather than paper for a more durable type of wall. It is also used to stop the wall from being damaged when exposed to water as a result of leakages or floods.
When one is working with drywall, there are certain tools and equipment used. Drywall is different from a regular cement or wooden wall and for that reason requires different equipment and tools. As an example, normal screws shouldn’t be used when you use drywall. Preferably, specific drywall screws should be used.
There are many different kinds of screws available to be used in various different types of jobs. Wooden screws, sheet metal screws, and drywall screws are the most common types. Drywall screws has a coarse thread that is supposed to secure drywall to wood while the fine thread type of the screw is used for attachment to metal studs.
Drywall screws are used for several different things and the type of drywall screw being used depends on the project. Other than what they are created for, listed below are a few other things they’re good for:
1.Installing deck boards: To lay deck boards equally, drop the screws between each course just before nailing it down. The big heads keep the boards in place so you can align the ends of the boards. You’ll be able to complete the project quicker and hassle-free.
2.Clean up a Connection: Before you install new fittings, use a drywall screw’s fine point to dig old compound and tape from the pipe threads.
3.Repair a squeak: For creaking or squeaking floors beneath a carpet, find the location where the floor meets a joist and put a drywall screw in it through the carpeting.
4.Stopper: drywall screws may be used as stoppers too. Screw one into the nozzle of a tube that contains liquid to seal it. You can leave it in and use it as a top that screws off.
5.Create a beginning point for a drill: tapping a small drywall screw with a hammer chips away a small amount of glaze on a porcelain tile. This tiny “hole” will be a starting point for the drill and will prevent it from moving around.
6.Clear up a sink: Because the drywall screw’s thread is so toothy, it could be tied to a string and lowered into a drain. It’ll clear a mild hair blockage in the drain. This is probably the most innovative use of the drywall screw I have run into so far, and, remarkably, it works!
As you can tell, the drywall screw can be used for more than what it is designed for. This little screw is a problem solver, all you should do is use your imagination and some creativity and voila, you’ve got a solution. See, things are not always as they appear to be!
Leave a Reply